Uzak amplifikatörlü, istenilen şekilde montaja
olanak sağlayan, sub-minyatür endüktif sensör

Dahili amplifikatörlü minyatür endüktif sensörler için µPROX E2E'yi inceleyiniz.

Çok küçük alanlar için 3 mm çaplı algılama kafası
18 mm uzunlukta, çok kısa M12 muhafaza
Hertürlü çevre koşullarına karşı direnç gösterebilmek için tamamı metal muhafazalı

Ordering information

Size			Order code (pre-wired types with 2 m cable length) 1 1. Cable length from sensor head to remote amplifier is 0.4 m
Size			Operation mode NO	Operation mode NC
3-mm dia.	⬛	−	E2EC-CR8D1	E2EC-CR8D2
5.4-mm dia.			E2EC-C1R5D1	E2EC-C1R5D2
8-mm dia.			E2EC-C3D1	E2EC-C3D2
M12			E2EC-X4D1	E2EC-X4D2

Size			Order code (pre-wired types with 2 m cable length) 2 2. Cable length from sensor head to remote amplifier is 0.4 m
DC 3-wire Operation mode NO	DC 2-wire Operation mode NO
8-mm dia.	⬛	−	E2EC-MC2B1	E2EC-MC2D1
E2EC-QC2D1-M1GJ-T 3 3. The remote amplifier is equipped with a M12 plug with 30 cm cable. Cable length from sensor head to remote amplifier is 0.5 m (fluoroplastic coating)

Size

Order code
(pre-wired types with 2 m cable length)

DC 3-wire
Operation mode NO

DC 2-wire
Operation mode NO

8-mm dia.

⬛

−

E2EC-MC2B1

E2EC-MC2D1

E2EC-QC2D1-M1GJ-T

(fluoroplastic coating)

Item		dia. 3	dia. 5.4	dia. 8		M12
Item		E2EC-CR8D_	E2EC-C1R5D_	E2EC-MC E2EC-QC	E2EC-C3D_	E2EC-X4D_
Sensing distance		0.8 mm±15%	1.5 mm±10%	2 mm±10%	3 mm±10%	4 mm±10%
Response frequency		1.5 kHz		100 Hz	1 kHz
Power supply voltage (Operating voltage)		12 to 24 VDC (10 to 30 VDC) ripple (p-p): 10% max.
Power supply voltage (Operating voltage)		12 to 24 VDC (10 to 30 VDC) ripple (p-p): 10% max.
Protective circuits		Surge absorber, short-circuit protection
Ambient temperature	Operating	−25 to 70°C (with no icing or condensation)
Ambient temperature	Storage	−25 to 70°C (with no icing or condensation)
Degree of protection		IEC60529 IP67
Material	Case	Brass		Stainless steel (SUS303)	Brass
Material	Sensing surface	ABS		Stainless steel (SUS303)	ABS

1. Cable length from sensor head to remote amplifier is 0.4 m

2. Cable length from sensor head to remote amplifier is 0.4 m

3. The remote amplifier is equipped with a M12 plug with 30 cm cable. Cable length from sensor head to remote amplifier is 0.5 m