Type
|
Analog output models
|
Model for Sensor Communications Unit
|
NPN output
|
E3NX-FA11AN
|
E3NX-FA0
|
E3NX-FAH0
|
PNP output
|
E3NX-FA41AN
|
Connecting method
|
Pre-wired
|
Connector for Sensor Communications Unit
|
Inputs/outputs
|
Outputs
|
2 outputs
|
−
|
−
|
External inputs
|
−
|
Light source (wavelength)
|
Red, 4-element LED (625 nm)
|
Infrared LED (870 nm)
|
Power supply voltage
|
10 to 30 VDC, including 10% ripple (p-p)
|
Supplied from the connector through the communication units.
|
Control output
|
Load power supply voltage:
30 VDC max., open-collector output
(depends on the NPN/PNP output format)
Load current:
Groups of 1 to 3 Amplifier Units: 100 mA max., Groups of 4 to 30 Amplifier Units: 20 mA max.
(Residual voltage:
At load current of less than 10 mA: 1 V max.
At load current of 10 to 100 mA: 2 V max.)
OFF current: 0.1 mA max.
|
−
|
Analog output
|
Voltage output: 1-5 VDC (10 kΩ or more connected load), temperature characteristics:
0.3% F.S. / °C
|
−
|
Control output
Response time
|
Super-high-speed mode (SHS)
|
Operate or reset: 80 µs
|
Operate or reset: 32 µs
|
High-speed mode (HS)
|
Operate or reset: 250 µs
|
Operate or reset: 250 µs
|
Standard mode (Stnd)
|
Operate or reset: 1 ms
|
Operate or reset: 1 ms
|
Giga-power mode (GIGA)
|
Operate or reset: 16 ms
|
Operate or reset: 16 ms
|
Sensitivity adjustment
|
Smart Tuning (2-point tuning, full auto tuning, position tuning, maximum sensitivity tuning, power tuning, percentage tuning (-99% to 99%)) or manual adjustment
|
Maximum connectable Units
|
30
|
With E3NW-ECT: 30 units (When connected to an OMRON NJ-series Controller.)
With E3NW-CRT: 16 units (Note: E3NX-FAH0 can not be connected.)
With E3NW-CCL: 16 units
|
No. of Units for mutual interference prevention
|
Super-high-speed mode (SHS)
|
0 (The mutual interference prevention function is disabled if the detection mode is set to super-high-speed mode.)
|
High-speed mode (HS)
|
10
|
Standard mode (Stnd)
|
10
|
Giga-power mode (GIGA)
|
10
|
Functions
|
Automatic power control (APC), Dynamic power control (DPC), Timer, Zero reset, Resetting settings, Eco mode, Bank switching, Power tuning
|