|
Model
|
F3SJ-E
____
P25
|
|
Sensor type
|
Type 4 safety light curtain
|
|
Setting tool connection
|
Parameter settings: Not available
|
|
Safety category
|
Safety purpose of category 4, 3, 2, 1, or B
|
|
Detection capability
|
Opaque objects 25 mm in diameter
|
|
Beam gap (P)
|
20 mm
|
|
Number of beams (n)
|
8 to 54
|
|
Protective height (PH)
|
185 to 1,105 mm
|
|
Lens diameter
|
Diameter 5 mm
|
|
Operating range
|
0.2 to 7 m
|
|
Response time (under stable light incident condition)
|
ON to OFF
|
15 ms max.
|
|
OFF to ON
|
70 ms max.
|
|
Startup waiting time
|
2 s max.
|
|
Power supply voltage (Vs)
|
SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
|
|
Consumption current (no load)
|
Emitter: Up to 22 beams: 41 mA max., 26 to 42 beams: 57 mA max., 46 to 54 beams: 63 mA max.
Receiver: Up to 22 beams: 42 mA max., 26 to 42 beams: 47 mA max., 46 to 54 beams: 51 mA max.
|
|
Light source (emitted wavelength)
|
Infrared LED (870 nm)
|
|
Effective aperture angle (EAA)
|
Based on IEC 61496-2. Within ±2.5° for both emitter and receiver when the detection distance is 3 m or over
|
|
Safety outputs (OSSD)
|
Two PNP transistor outputs, load current 200 mA max., residual voltage 2 V max. (except for voltage drop due to cable extension), Leakage current 1 mA max., load inductance 2.2 H max. , Maximum capacity load 1 μF
|
|
Output operation mode
|
Safety output: On when receiving light
|
|
Input voltage
|
ON voltage: Vs-3 V to Vs, OFF voltage: 0 V to 1/2 Vs or open
|
|
Mutual interference prevention function
|
Mutual interference prevention algorithm prevents interference in up to 3 sets.
|
|
Test function
|
Self test (at power-ON and at power distribution)
External test (emission stop function by test input)
|
|
Protection circuit
|
Output short-circuit protection, and power supply reverse polarity protection
|
|
Ambient temperature
|
Operating: -10 to 55°C (non-freezing), Storage: -25 to 70°C
|
|
Ambient humidity
|
Operating: 35% to 85% (no condensation), Storage: 35% to 95% RH
|
|
Operating ambient light intensity
|
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
|
|
Insulation resistance
|
20 MΩ min. (at 500 VDC)
|
|
Dielectric strength
|
1,000 VAC 50/60 Hz, 1 min
|
|
Degree of protection
|
IP65 (IEC 60529)
|
|
Vibration resistance
|
Malfunction: 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps in X, Y, and Z directions
|
|
Shock resistance
|
Malfunction: 100 m/s
2
, 1,000 times each in X, Y, and Z directions
|
|
Pollution degree
|
Pollution degree 3 (IEC 60664-1)
|
|
Power cable
|
Connection method: Pull-out type, cable length 3 m
Number of wires: Emitter: 5 wires, receiver: 6 wires
Cable diameter: Dia. 6 mm
Allowable bending radius: R5 mm
|
|
Extension cable
|
30 m max.
|
|
Material
|
Case: Aluminum
Cap: ABS resin, PBT
Optical cover: PMMA resin (acrylic)
Cable: Oil resistant PVC
|
|
Weight (packed state)
|
Weight (g) = (protective height) × 2.6 + 800
|
|
Accessories
|
Test rod, Instruction Manual, User's Manual (CD-ROM)
|
|
Applicable standards
|
IEC 61496-1, EN 61496-1 UL 61496-1, Type 4 ESPE (Electro-Sensitive Protective Equipment)
IEC 61496-2, CLC/TS 61496-2, UL 61496-2, Type 4 AOPD (Active Opto-electronic Protective Devices)
IEC 61508-1 to -3, EN 61508-1 to -3 SIL3
IEC 13849-1: 2006, EN ISO 13849-1: 2008 (PLe, Cat.4)
UL 508, UL 1998, CAN/CSA C22.2 No.14, CAN/CSA C22.2 No.0.8
|